High-Gain 20–40 km PTP LinksThe 1.2m Mimosa B6x Twist-on 2-pack is a high-gain dish antenna solution built for long-range point-to-point (PTP) microwave backhaul using Mimosa X connector radios. These antennas have the appropriate gain for 20–40 km links and deliver strong antenna gain with a narrow beamwidth to improve signal stability and throughput for rural broadband, enterprise connectivity, and other reliability-critical deployments. Narrow Beamwidth and SNR BenefitsDesigned to deliver sufficient gain for maximum signal quality in low-noise environments, it supports strong link performance and consistent throughput over distance. The narrow beamwidth helps reduce the impact of noise, improving SNR and maintaining stable performance on longer paths. Durable, Low-Maintenance OperationIts rigid dish structure supports stable alignment and consistent performance in changing weather conditions. With proper installation and routine inspection, it can deliver reliable long-range point-to-point throughput for years with minimal maintenance and reduced total cost of ownership. Direct Twist-On Connection for Mimosa X RadiosTwist-on connectors attach directly to Mimosa B6x/B5x/C6x/C5x radios to eliminate conversion loss. This direct attachment simplifies installation, reduces connection losses, and helps maintain stronger end-to-end link performance.. No Cable and Conversion LossCompared to an X-to-cable (X2C) adapter setup, the signal path introduces extra conversion loss: the Mimosa radio converts the electrical signal into RF energy, the X2C adapter converts it back into an electrical signal for coaxial transmission, the coaxial run adds cable loss, and a second X2C adapter at the antenna converts the signal back into RF energy—so each conversion adds loss on top of the coaxial cable loss, reducing overall link efficiency. Simplified InstallationThe twist-on interface mounts directly to Mimosa B6x/B5x/C6x/C5x radios, making it a straightforward antenna option for Mimosa X connector deployments, while direct mounting reduces unnecessary interconnects and potential points of failure to improve reliability and streamline field deployment for WISPs and integrators. Remote Relay SitesWith a strong front-to-back ratio, the 1.2m dish helps limit unwanted signal pickup from behind the antenna—an advantage for remote relay sites and other less-crowded installations where cleaner RF conditions are easier to maintain. It does not include a shroud and is not a deep-dish design, which can result in more prominent 90° side lobes. Careful placement and separation planning can help mitigate interaction with nearby antennas, making it best suited for deployments that aren’t heavily colocated on dense towers. Lightweight and Easy to DeployEach box includes two 1.2m dishes for cost-effective shipping. The low-profile design (without a shroud or radome) keeps the antenna lightweight for easier handling and mounting, supporting streamlined backhaul rollouts. What Problems Does the 1.2m Dish for Mimosa B6x Solve?Extends Wireless Links Over Long DistancesThe high-gain 1.2m parabolic design helps operators maintain strong signal levels over extended distances, enabling reliable point-to-point links where smaller antennas may not provide sufficient performance. Increases Link Capacity and ThroughputBy concentrating RF energy into a narrow beam, the antenna improves signal quality and supports higher modulation rates, allowing operators to transport more traffic between network sites. Improves Reliability in Challenging EnvironmentsLong-distance links often experience signal degradation due to distance, environmental factors, and noise. The high gain of the dish provides additional link budget, helping maintain stable connections and reducing link interruptions. Reduces InterferenceThe antenna's narrow beamwidth minimizes the reception and transmission of unwanted RF signals from surrounding directions. This helps improve performance in congested RF environments and supports more reliable network operation. Provides an Alternative to Fiber DeploymentInstalling fiber between remote locations can be expensive and time-consuming. The 1.2m Dish enables operators to deploy high-capacity wireless backhaul links quickly and cost-effectively without trenching or leasing fiber infrastructure. Supports Network ExpansionAs subscriber demand increases, operators need additional transport capacity between towers and network aggregation points. The high-gain dish allows networks to expand into new areas while maintaining high-capacity backhaul connections. Enables Connectivity in Remote LocationsMany rural, industrial, and remote sites lack access to wired broadband infrastructure. The antenna provides a practical solution for delivering reliable high-speed connectivity to these locations. Simplifies Long-Term Network PlanningThe wideband design allows operators to use multiple frequency ranges supported by the Mimosa B6x, reducing the need to replace antennas when migrating to new channels or expanding network deployments. Typical Use CasesLong-Distance Point-to-Point (PtP) Wireless BackhaulThe 1.2m Dish for the Mimosa B6x is designed for building high-capacity wireless backhaul links over long distances. Its large parabolic reflector provides high gain and a narrow beamwidth, allowing operators to maintain strong signal levels and high modulation rates across extended links. It is ideal for connecting towers, POPs, and network aggregation sites. High-Capacity Tower-to-Tower LinksWISPs often deploy this dish to transport large amounts of traffic between major network sites. The high gain helps maximize throughput and improve link reliability, making it suitable for carrying subscriber traffic between distribution towers and core network locations. Long-Distance Rural Broadband NetworksIn rural and remote areas where fiber deployment is impractical or cost-prohibitive, the 1.2m Dish enables operators to create long-range wireless connections. The antenna's focused beam helps maintain stable links across challenging terrain while delivering broadband services to underserved communities. High-Interference EnvironmentsThe narrow beamwidth of the 1.2m Dish minimizes the amount of unwanted RF energy entering and leaving the antenna. This makes it well suited for deployments in congested RF environments where reducing interference is critical to maintaining high link performance. Licensed and Unlicensed Wireless NetworksThe dish's wideband design supports operation across multiple frequency ranges used by the Mimosa B6x. Operators can deploy it in various licensed and unlicensed spectrum bands without changing antennas, simplifying inventory management and future network upgrades. Network Expansion and Redundancy LinksWISPs frequently use high-gain dishes to add redundant paths between key sites or expand coverage into new service areas. The antenna can establish reliable backup links and provide additional transport capacity as network demand grows. Video Surveillance and Enterprise ConnectivityThe antenna is also suitable for connecting remote facilities, campuses, industrial sites, and surveillance systems that require high-bandwidth, low-latency connectivity over long distances without relying on leased fiber infrastructure. Disaster Recovery and Temporary Network DeploymentsThe dish can be deployed for temporary high-capacity links during emergency response operations, special events, or network restoration projects where rapid deployment and reliable long-distance connectivity are required. Who Is the 1.2m Dish for Mimosa B6x Designed For?The 1.2m Dish for Mimosa B6x is ideal for: • Wireless Internet Service Providers (WISPs) building long-distance, high-capacity point-to-point (PtP) backhaul links • Fixed wireless broadband operators connecting towers, POPs, and network aggregation sites • Rural broadband providers extending connectivity to underserved and remote communities • Network operators requiring reliable, high-throughput wireless transport over long distances • Service providers deploying Mimosa B6x radios for carrier-grade backhaul applications • Enterprises, campuses, and industrial organizations interconnecting multiple buildings and facilities • Government agencies, utilities, and public safety organizations requiring dependable long-range communications infrastructure • System integrators and wireless installers designing high-performance backhaul networks in challenging RF environments • Operators deploying links in congested spectrum environments where high gain and narrow beamwidth help reduce interference • Service providers seeking a cost-effective alternative to leased circuits or fiber deployment for long-distance connectivity What Makes the 1.2m Dish for Mimosa B6x Different from Similar Products?Specifically Designed for the Mimosa B6xUnlike generic parabolic dishes that require adapters or custom mounting solutions, this antenna is engineered specifically for the Mimosa B6x radio, providing straightforward integration and optimized RF performance. High-Gain 1.2m ReflectorThe large 1.2m reflector delivers higher gain than smaller dishes, enabling longer link distances, improved signal quality, and greater link budget for demanding backhaul applications. Wideband Frequency CoverageThe antenna supports the wide frequency range used by the Mimosa B6x, allowing operators to deploy across multiple channels and spectrum allocations without changing antennas. Narrow Beamwidth for Improved Interference RejectionIts highly focused beam reduces the reception and transmission of unwanted signals from surrounding directions. This helps improve performance and reliability in congested RF environments. Optimized for High-Capacity Wireless BackhaulThe antenna is designed for carrier-grade point-to-point links that require high throughput and low latency. It helps operators maintain higher modulation rates and transport more traffic between network sites. Built for Professional Outdoor DeploymentsThe rugged construction is designed to withstand long-term outdoor operation, making it suitable for tower installations, rural deployments, and mission-critical network infrastructure. Cost-Effective Alternative to FiberBy enabling long-distance, high-capacity wireless links, the antenna allows operators to expand networks and interconnect sites without the cost and complexity of deploying fiber infrastructure. Frequently Asked QuestionsWhat is the 1.2m Dish for Mimosa B6x used for?The antenna is designed for long-distance, high-capacity point-to-point (PtP) wireless backhaul links. It is commonly used for tower-to-tower connections, network aggregation, and extending broadband services to remote locations. Which radio is this dish designed for?The antenna is specifically engineered for the Mimosa B6x connectorized backhaul radio, providing straightforward integration and optimized RF performance. Is this antenna suitable for long-distance links?Yes. The high-gain 1.2m reflector provides additional link budget, making it well suited for long-distance wireless backhaul applications that require reliable performance. Can this antenna be used in high-interference environments?Yes. The narrow beamwidth helps reject unwanted RF signals from surrounding directions, improving link reliability and performance in congested RF environments. Does the antenna support high-throughput applications?Yes. By improving signal quality and maintaining higher modulation rates, the antenna supports high-capacity data transport and demanding backhaul requirements. Is this antenna suitable for rural broadband deployments?Yes. The antenna enables operators to establish reliable long-distance connections in rural and underserved areas where fiber infrastructure may not be available. Can this dish be used as an alternative to fiber?Yes. The antenna provides a cost-effective way to create high-capacity wireless backhaul links without the expense and complexity of deploying or leasing fiber infrastructure. Is the antenna designed for outdoor installations?Yes. The antenna is built for professional outdoor deployments, including tower sites and other long-term wireless infrastructure installations. Can this antenna be used for network redundancy?Yes. Many operators deploy the antenna to establish backup links and redundant paths between critical network sites to improve network resilience. Does this product include one antenna or a pair?The product is supplied as a 2-pack, making it suitable for deploying both ends of a point-to-point wireless link. Why choose a 1.2m dish instead of a smaller dish?A larger 1.2m reflector delivers higher gain and greater link budget, which can enable longer link distances, improved reliability, and better performance in challenging RF environments.